Fix Xfinity Router Flashing Orange No Internet

Xfinity routers are widely used for their incredible internet coverage and speed. It has helped millions of remote workers to improve their Wi-Fi experience. But, sometimes while using this router, you might notice that its orange light is blinking. It indicates that something is wrong with the Xfinity router. Over time, this device might stop functioning due to heavy usage. Maybe, this is why you get to see the orange light in the device. It can also occur due to the malfunctioning splitter.

Moreover, loose wires can often create this issue in the Xfinity router. If the device is going through a software update, then also the orange light blinks. Apart from these, the orange light might blink for the unwanted service outage. Turn on and off the Xfinity router in the first place. It can help you to overcome this connectivity error of the router.

But, if that doesn’t work, contact the internet service provider. There is a high chance that the ISP has turned off the connection. And, this is why you are getting the “Xfinity router flashing orange no internet” error.

4 Solutions to Fix the “Xfinity Router Flashing Orange No Internet” Issue

Wait until the Xfinity router’s firmware update completes. Even after that, if the orange light blinks, then diagnose the device properly. A faulty router can often lead to this internet connection problem.

In certain instances, you have to replace the Xfinity router immediately. But, make sure to contact a veteran expert before coming to a decision.

Sometimes, a faulty wire can prevent the users from getting an internet connection. Replacing the cables can solve the “Xfinity router flashing orange no internet” issue. But, if the error remains, check whether you have connected the PC with the right Wi-Fi.

You might be using an incorrect IP address, which can also be a possible cause of this error. And, fortunately, there are a few effective solutions to overcome this router error.

Follow these troubleshooting methods to solve the “Xfinity Router Flashing Orange No Internet” error:

Reboot the Xfinity Router

Sometimes, power cycling the router can fix the internet connection issues. But, do you know how to proceed? Start with turning off the Xfinity router first. After that, disconnect all the cables or wires that are connected to the device. Also, make sure to turn off the power sources.

Wait for a few minutes and then connect the cables and wires in their right router port. From the “Internet Mode” section, tap on the “Power” button. Don’t release this button until the Xfinity router turns on.

After a while, you might notice that the orange light has stopped blinking. And, if the “Xfinity router Flashing orange no internet” error remains, take an expert’s help.

Look for the Damaged Splitters

Do you use a coaxial splitter in the Xfinity router? Check if there is any wear and tear on it. Though, splitters allow the users to transmit the internet without any hassle. But, if it becomes defective, then it can cause a lot of issues. As a result, the orange light of the Xfinity router keeps on blinking.

To solve this problem, consider connecting the internet cable directly with the router. Once done, the orange light of this router won’t further blink. Alternatively, you can also consider changing the coaxial splitter. Visit an e-commerce site and choose the compatible splitter for the router. However, if you have been using the splitter for 1-2 years, then repair it with professional help.

Check for the Service Outage

Well, service outages can affect the internet strength of the router. And, for this, the “Xfinity router flashing orange no Internet” error occurs. Thus, if you are unable to connect the device with the internet, go to Xfinitity’s site. If a service outrage is going on, it will be shown on their website.

Additionally, you can get this information from the Xfinity application. Make sure to turn on the alert messages to get aware of these internet issues. Once Xfinity resolves the service outage, the orange light will stop blinking automatically. It might take an hour or more for the service outage to end. Wait until then, and then surf through the internet without any hurdle.

Replace the Faulty Cables

Over time, the Xfinity router cables might get damaged. It can also lead to an “Xfinity router flashing orange no Internet” error. Though, it seems easy to identify the problematic cables or wires. But, sometimes, it becomes difficult to find the worn out parts.

In certain instances, hire an experienced router repair expert immediately. Replace the malfunctioned cables with new ones to solve this connection error. Make sure to get the right cable for the Xfinity router model. Or else, it can hinder the Wi-Fi connection of the Xfinity router again.

Are there any Other Ways to Fix the “Xfinity Router Flashing Orange No Internet” Error?

If you have placed the router far away from the laptop, then the orange light will blink. Moreover, this problem can take place if the authentication from the server isn’t available. Try to connect with the technical support team of Xfinity. With their assistance, you can fix this router error immediately.

If even after these, you are not getting an internet connection, change the router. Don’t buy this device from any third party company, it might cause further issues. Instead, go to an authorised Xfinity store and get a new router now.