D-Link routers are one of the most popular routers worldwide. You might have to reset your router when you forget the required username and password. Without the right username and password, you can’t enter your router’s web interface or admin panel. You need to reset your router to use the default username and password.
The process of D-Link router resetting is not that complicated. Users can reset the router by accessing the web interface, as well. But, when the admin panel is not accessible, then you need to proceed with the hard reset of D-Link routers.
D-Link router resetting requires a few basic steps. If you are a new user, then you should go through this guide and discover what you should do for D-Link router resetting.
How to Perform D-Link Router Resetting?
We recommend a hard reset only when you have forgotten the credentials to enter the router’s admin panel. The admin panel of any router is the hotspot of personalisation, configuration, security, and much more.
If you have to strengthen the security and can’t remember the username or password, you need to hard reset your D-Link router. D-Link router resetting will wipe out all the pre-modified settings and assign default values and parameters to your D-Link router.
Here is the step by step process that you need to follow if you want to go for a D-Link router resetting:
To begin with, your router should be active. Make sure that your D-Link router is connected to the nearby electrical source. Otherwise, D-Link router resetting won’t work out.
Find the Reset Button
You should keep your router’s user manual handy. It comes with relevant pictures, and they will tell you where you can locate the Reset button. Generally, the Reset button on any router is hidden at the rear side of the router. Locate the Reset button and verify it with the help of the user manual.
Press & Hold the Reset Button
The next step is to press and hold the button. However, the Reset button is so small that you require a sharp object to hold it properly. You can get a paper clip or a ballpoint pen.
If you’re using a paper clip, then straighten it out, and then use it to press the Reset button. However, if it’s a ball-point pen, then use the nib of the pen to press the button for D-Link router resetting. Don’t release the Reset button immediately, and you need to hold the Reset button for 10 to 15 seconds. You can check the exact time mentioned in the user guide.
Let the Router Reset and Restart
After 10 to 15 seconds, you should release the Reset button. Now, your D-Link router should have started the process of resetting. The LEDs on the router might start flashing depending upon the router’s functionality. However, you can expect the router to restart after a few seconds of D-Link router resetting.
All the default settings should have been restored meanwhile. You can assume that everything is OK when the WLAN lights get solid. Now, you should be capable of entering the web interface of the D-Link router with the default username and password.
Ensure that you don’t try logging into the router’s admin panel when the WLAN lights are still flashing. When WLAN lights are still flashing after a D-Link router resetting, it means that the router has not still connected to the internet. You should try connecting to the D-Link router’s web interface when there’s a stable internet connection. Additionally, use a wired connection when setting up your router through your computer.
What are the Default Username and Password for D-Link Routers?
After a successful D-Link router resetting procedure, you require your D-Link router’s default username and password. The login credentials might vary depending on the model of the router. If you use D-Link routers with the DIR-xxx model, the default username will be ‘admin’, and the default password is blank. It means that it requires no password.
On the other hand, the default login credentials are different for D-Link routers with DSR-xxx models. The default username is ‘admin’, and the default password is also ‘admin’. Make sure that you enter the login credentials without the quotation.
How can you Configure Router after D-Link Router Resetting?
When you are done with D-Link router resetting, you need to configure it. Perhaps, it was your ISP who had configured your router before. However, you can configure a router on your own. After resetting your D-Link router, everything has been rolled back to its default settings. Whether it’s username, password, or the IP address of your D-Link router.
Here’s how you can proceed with a router configuration after a D-Link router resetting process:
Enter the IP Address on the Web Browser
First, you have to connect your router to a computer. Now, you should launch a web browser of your choice, and it can be Microsoft Edge, Safari, Google Chrome, Mozilla Firefox, or Opera.
Type the default IP address of your router, which should be https://192.168.1.1. For a D-Link router, it should be https://192.168.1.1. Ensure that you don’t use any other mutation of this IP address. This is a dedicated IP address for D-Link.
Provide the Login Credentials
Now, you need to enter the username and password to the login prompt of the webpage. The username is always ‘admin’. However, check the password for your D-Link router model as mentioned above.
You can double-check it by visiting the official website of D-Link routers. Make sure that you enter the right model number. After providing the right login credentials, you can click the Login button.
Now, the upcoming screen might come with on-screen instructions, follow them, and make necessary changes after a D-Link router resetting.
While entering the IP address, you have to ensure that you don’t make any typing mistakes. The same applies to setting the new username and password. Strengthen the security of your network by modifying the login credentials. And, D-Link router resetting is the only way to revive your chances to get back access to the admin panel when you have forgotten your username and password.