192.168.0.8 – How to Log into the Router?

The internet is a network of devices. And, recognising any device in the cluster of such network-enabled devices can be difficult without the concept of IP addresses. Well, IP addresses can be public and private. 192.168.0.8 is a private IP address that is assigned to a specific router or modem.

If you have come across that your router’s default IP gateway is 192.168.0.8, then hang tight. You will need this IP address to enter your router’s web interface and configure the device. The router is used to track the network usage and the users. So, you should be able to log into your router’s admin panel through the IP address 192.168.0.8 for the sake of the network. Let’s find out how to log into your 192.168.0.8 router’s admin panel.

Simple Steps to Enter the 192.168.0.8 Router’s Admin Panel

Connecting to the admin panel of your router is not rocket science. It’s pretty simple and straightforward. Usually, the Internet Service Provider sets up routers for the first time. But, you can do it on your own, too. To set your 192.168.0.8 router, you need to unbox the device and plug it into a nearby power supply.

Additionally, make sure that your router resides near the main router-modem or modem. Connect the router to the modem. And, you are ready to fetch the admin panel associated with 192.168.0.8. If your router is already set, then you can start with the following steps:

Link your 192.168.0.8 and Computer

Hopefully, you have connected your computer to the 192.168.0.8 router. If not, then get an ethernet cable for a quick wired connection. Just insert one end of the ethernet cable to one of the LAN ports of the router. Now, turn back to your computer and plug the other end of the ethernet cable. The benefit of a wired connection (between the router and computer) is that you need not enter a password for a stable and secure connection.

However, not everyone prefers a wired connection. If you can’t find an ethernet cable, then you have to switch to a wireless connection. To make it happen, ensure that your computer’s Wi-Fi connectivity is active. Now, you need to search for your router’s wireless network.

Look for the default SSID that is mentioned on the router. Click on it and provide the default password for easy access. The password should be there on the router, too. After providing the right credentials, the router will allow the computer to join the network. Unless the computer joins the 192.168.0.8 network, you won’t be able to get into the web interface.

Open a Web Browser on your Computer

You need a web browser or network agent to fetch the IP address on the internet. So, explore a web browser and type 192.168.0.8 on the browser’s address bar. Or, you can just enter the following address: https://192.168.0.8.

Be careful while entering the IP address. Make sure that you don’t use any other mutations other than this. Now, it should take you to the web interface or admin panel of your 192.168.0.8 router.

What if it Doesn’t?

If entering the IP address doesn’t take you to the desired login prompt, try fetching the same IP address on different browsers. Otherwise, you can go for another computer or smartphone.

If nothing is working for you then, you have to confirm whether your router comes with the default gateway IP 192.168.0.8 or not.

To check this, you need to perform the following steps on your Windows computer:

• Open a Command Prompt window on your computer.
• Simply search for CMD and click on the first result, and it will open a Command Prompt window.
• Now, enter the command ‘ipconfig’.
• This will return you detailed information about your router’s network. Check the default gateway, and if it says anything rather than 192.168.0.8, that’s the default IP address of your router.

If it’s 192.168.0.8, you are all set to enter the web admin panel of your router. Perhaps, there is a glitch with the network connection, and you might have to wait for a while.

Log into the Router’s Admin Panel

The last thing that’s left is to provide the credentials to log into the web interface of the router. There are different brands that use the same private default IP address for their routers. For example, 4ipnet, Acelink, Actiontec, AT & T Uverse, Belkin, Linksys, and other brands can assign the same IP address for their routers.

And, the default login credentials can vary from one brand to another. Hence, it’s very important to find out what the username and password are for your router’s model number. You can do a quick search on a search engine to get an answer to this. Simply go to the brand’s official website and enter your router’s model number.

It will show you the login credentials. Input them carefully on the login prompt of your 192.168.0.8 router. Finally, click the Login button. You should have reached the web administration panel of your router. There you can manage the activities of every associated user. On the other hand, you can rename the SSID of the router’s network. Moreover, you can strengthen the security of the network and set parental control, if required.

Can You Change the Default IP Address 192.168.0.8 of the Router?

Yes, it’s possible to modify the default IP address of the router. For instance, 192.168.0.8 can be another device’s IP address in the same local network. It can create a conflict among all other devices.

Additionally, anyone can navigate to the router’s admin panel if you keep it default. So, you should change the IP address of the router from 192.168.0.8 to any suitable IP address. Go to the admin panel and make the required changes.