Why My Belkin Wifi Extender is Not Working and How to Fix it?
A range extender can be a great way to enhance your Wi-Fi network’s range. It can help you ensure a strong wireless signal in all parts of your home. You can easily set up your Belkin WiFi Extender and start using it.
But, what if you are unable to use it? Then, you are not alone, as many Belkin extender users have reported, “my Belkin Wifi extender is not working”.
You can usually fix this problem all by yourself unless there is a hardware issue. All you need to do is try out some simple fixes for it. Apply the ones we have mentioned below to get your Belkin extender working within a short time.
Causes of Belkin WiFi Extender Not Working and their Fixes
You must consider all the possible causes of your Belkin WiFi extender not working to find an appropriate solution. And, they might range from temporary errors to misconfigurations.
Here are the common causes of this problem and their solutions:
Are you unable to get a good signal strength with your Belkin range extender? Then, this might happen due to obstructions to the signals, such as walls. In such cases, you need to remove these obstructions to get a solution.
Is there a significant distance between your extender and the router? Then, place the extender closer to the router so that the former receives a better signal. Make sure there are not too many walls between them.
Open a web browser once you are done and check whether you can access the internet. Does the problem persist? If yes, then you must consider interference to your signals as the cause.
Interference to WiFi signals is quite a common issue as the number of WiFi networks in an area increases. So, this problem will probably grow much bigger in the future. Regardless, you can fix it by changing the wireless channel that you are using. You can do that in a few steps after logging in to your router.
Access your router’s interface and go to its wireless settings. Then, change the channel and the bandwidth you are using. As you might know, the 5 GHz band offers more channels than the 2.4 GHz band. Also, some channels might face lesser interference than others.
You can use a WiFi analyser tool to know which bands the nearby networks are using. And, that might help you select a suitable band for your network.
Too Much Traffic in the Network
Are there too many devices connected to your network? Then, that might answer the question, “Why my Belkin WiFi extender is not working?”. You simply need to disconnect a few devices from the network in such situations. And, that should fix the problem in most cases of high network traffic.
What if you cannot disconnect enough devices from the network? In that case, you can try switching to a different wireless channel. However, this does not always work, and you might have to wait until the traffic is reduced.
The Extender is Connected to the Wrong Network
Are you sure that you have connected your Belkin extender to the right network? After all, there might be nearby networks with similar names as the one you are using. And, that can cause quite a lot of confusion in many cases. So, you must check whether you have connected the extender to the wrong network.
Are you unable to view the extender’s network on your device? Then, you have probably connected it to the wrong network. Connecting it to the right one should fix the problem effectively in such situations.
Error within the Connection
Your Belkin WiFi extender might not work due to a temporary issue within the connection. You can take some simple steps to fix the problem in such cases. Restarting the extender can provide you with an effective solution to temporary errors.
So, turn it off for a minute, and then turn it back on again. Then, connect it to your router and use the extended network. You should be able to use your Belkin WiFi extender’s network now.
Alternatively, you can also try refreshing the connection. Forget your Belkin extender’s network on your device. Then, connect to it again using the password and check whether you can use its network on your device.
Incompatible Wireless Settings
Does the problem persist after you try the aforementioned methods? Then, you must make sure that the extender’s wireless settings match the connected devices. To do that, you need to log in to your extender’s interface.
Open a browser and enter the default IP address of your Belkin extender. This should take you to the login page, where you must enter the credentials.
Go to the wireless settings section on the interface and check the selections there. Make sure they are compatible with the wireless properties of your computer. If required, change the settings to suit the connected device’s wireless properties. Then, check whether you can use your Belkin router’s network. Alternatively, you can also simply use a different device to connect to the extender.
The problem you are facing with your Belkin router might also indicate outdated firmware. So, you must make sure that you have the latest firmware version on the device. Go to the support website to download the latest firmware for your extender model.
After downloading the latest firmware, log in to the user interface and open the Firmware Update section. Browse the downloaded file on your device and upload it to the extender. Log out once you have completed the firmware update and check whether the problem persists.
What to do if the Belkin WiFi Extender Issue Persists?
Does your Belkin WiFi extender’s network keep failing to access the internet? Then, that might happen due to a misconfiguration. So, you must try resetting it and setting it up once again. If that does not work, there might be a hardware issue, and you might need to replace your Belkin extender.