Call Us! +1-855-589-4554

Guide to TP-Link Travel Router Setup and Configuration

TP-Link AC750

You can use your TP-Link travel router in various operation modes as per your requirements. But, you can start using it only after going through its configuration procedure.

So, you might want to set up your TP-Link travel router as soon as possible after you buy it. And, we can help you out if you are wondering how to do that. Follow any simple steps below to accomplish the TP-Link travel router setup.

TP-Link Travel Router Setup: How to Proceed?

You can configure your TP-Link travel router within a few minutes. All you have to do is proceed with the following steps:

Prepare Your Router

Does your router have a built-in modem? If yes, then you can connect it to your PC right away. But, if it has a separate modem, you need to connect the router and modem first.

Connect the internet cable to the modem and connect the modem to the router with an ethernet cable. Then, you must connect the router to a power source and your PC. Also, you must use an ethernet connection between your router and computer for a reliable connection.

Make sure the router is connected to power so that you can proceed with the TP-Link travel router setup. It might take at least a minute to get ready after you power it on. You can perform either a Quick Setup or a Wi-Fi Protected Setup after the router’s light turns solid. Moreover, you can also simply use the Tether app for this task

Configure it with Quick Setup

Configuring your router through the web interface offers you a wide range of customisations. So, you might be able to set up a more personalised Wi-Fi network by this method. You must proceed with the following steps to complete the Quick Setup on your TP-Link router:

Open the Web Interface on Your Browser

You can access your TP-Link router’s interface on any browser by entering “tplinkwifi.net”, regardless of the model. Then, get started with the TP-Link travel router setup. You can also use the router’s default gateway to access the login page. But, using the aforementioned web address might be more convenient for most users.

Set an Admin Password

You would not have to enter the credentials while accessing the router for the first time. The interface will ask you to set a password for admin login. And, you must take your time to come up with a strong password. After all, that is a crucial step to ensure your router’s security.

You can also choose Low, Middle and High-security options under the password field. Re-type the password in the field given below and click on “Let’s Get Started”. This will start the TP-Link travel router setup procedure.

Go to the Quick Setup tab

You must go to the Quick Setup tab on the interface to start the configuration. Select an appropriate Time Zone and click on Next. Then, you can opt for a static or dynamic IP for your router. You can also use PPPoE, PPTP, and L2TP connection types as per your requirements. You might have to enter your IP information next depending on your choice.

You can opt for enabling the wireless radio and hiding its SSID. After that, you must set an SSID and password for your wireless network. If your router model is dual-band, you need to set different names for each band. Also, make sure you have enabled both the bandwidths on your network. Review your settings and save them to complete the TP-Link travel router setup procedure. You can then connect your computer to the router for accessing the internet.

Configure it with Basic Setup

The basic setup process is quite similar to the quick setup. You need to access your router’s interface to proceed with it. Set an admin password, and then proceed to the Basic tab instead of the Quick Setup one. You would have to provide less information in this procedure than the previous one.

So, a basic setup might take less time than a quick setup. But, you might have to reaccess the interface to make further customisation later on. After all, the basic setup only configures the crucial aspects of your TP-Link router’s network.

Use the Wi-Fi Protected Setup (WPS)

Do you want to start using the router immediately? Then, you can use the WPS button for setting up your TP-Link router. In case you are wondering, this button is located at the rear panel of your router. You should find it next to the LAN ports and the Reset button. Press the WPS button and check the router’s light when you find it. Connect your device to the router when its light turns solid and try to access the internet.

However, some devices might not support the WPS connection. In such cases, you can use the Tether mobile app to manage TP-Link routers.

Setup With the Tether App

Tether is compatible with all the latest TP-Link routers. And, you can use it to configure and control your router conveniently. Launch this app on your phone and log in to your TP-Link ID.

Select the TP-Link travel router from the list of devices. Then, you must create a username and password for the device. Select your profile name and review the information you see for it.

Click on Next to configure the 2.4 GHz and 5 GHz networks. Set SSIDs and a password for them, and click on Next to view all your settings. Click on Apply and then on Finish to procure and exit the app. You can then connect to your router and start using its network.

Update the Firmware

Your TP-Link router might not come with the latest firmware when you buy it. So, you must make sure it is up-to-date if you want a consistently good performance. If your router uses an outdated one, you can look for the latest firmware version and install it through the web interface.