Spectrum Router Blinking Blue: Here’s How to Fix It
The Spectrum router’s blue light blinks when it fails to establish a reliable connection. It prevents the users from connecting their devices to the Wi-Fi. Thus, try to fix this internet loss issue at the earliest possible. Restart the wireless router when the power light flashes blue. If that doesn’t work, check the power cables immediately.
A faulty power unit could prevent the router from connecting to the internet. Replace the power cable or outlet if you find any wear and tear. Additionally, you need to check the Ethernet cable. Disconnect and reconnect this cable to resolve the Spectrum router blinking blue error. Ensure to connect the ethernet cable to the correct router and PC port
What Causes the Spectrum Router Blinking Blue Error?
Several reasons could trigger this connectivity problem in the Spectrum router. It could be for using a damaged router or faulty port to connect the cables. Sometimes, a malfunctioned modem generates this problem in the wireless routers. Replace the modem in such circumstances to resolve the issue.
Did you connect more than three devices to the router? This could slow down the Wi-Fi speed, leading to connectivity problems. The Spectrum router users should limit the number of devices on the home network to avoid this issue. And, always place the smart Wi-Fi router close to the Wi-Fi enabled devices and modem.
Spectrum Router Blinking Blue — When does it Occur?
The blinking blue status light lets the users know what is wrong with the router. Is the power LED flashing blue too fast? This indicates the wireless router is booting up. And, it will turn solid blue when it connects to the Wi-Fi.
If the blue light is blinking slowly, the router connects to the internet. This light will stop flashing once it connects the devices with the Wi-Fi. And, the router’s blue and red light blinks simultaneously during the firmware update. Don’t turn off the device in the middle of the update, and it might damage its hardware.
3 Easy Solutions to Resolve the Spectrum Router Blinking Blue Error
There are many ways to fix this connection error from the Spectrum router. However, you should acknowledge the source of the problem before that. Otherwise, solving this blue light blinking error might be challenging. Due to overheating, this status light might flash continuously. And, it might cause problems connecting to the internet.
Turn off the Spectrum router when you no longer need the Wi-Fi. It will prevent the device from generating excessive heat. Additionally, the users should keep the router in a place that offers proper airflow. This would help you to avoid further issues caused by overheating.
If that doesn’t work, follow these solutions to fix the Spectrum router blinking blue light issue:
Power Cycle the Router and Modem
Reboot the networking devices to overcome the connectivity problem. Unplug the Spectrum router’s power cables from the electrical outlet first. Disconnect its ethernet cable and wait until all the status lights stop flashing. Now, turn off the modem by unplugging its power cords.
Wait for at least 2-3 minutes, and then power off the connected devices. Plugin the Spectrum router’s power cables after a few seconds. Ensure to connect the Ethernet cable to the right port. Turn on the modem by reconnecting its power cables and wait until its LED lights turn green.
Restart the Wi-Fi enabled devices, like PC or smartphones. Connect to the Wi-Fi, open a browser and check if you can use the internet.
Still getting the Spectrum router blinking blue error? Reset the wireless router’s configuration to restore the internet connection.
Check for Server Outage
Sometimes, the users might face the problem of an unwanted server outage. Visit Spectrum’s support page to get an update about it. Open a browser, go to the URL bar and write “Spectrum Outage Information”.
Press the Enter key and look for the support page from the searched results. Open the chatbox and wait until it shows the network issue list. Choose “Outage” and enter the login credentials when prompted. Spectrum will notify you if the server is down.
Do you use the Spectrum app on Android or iOS devices? Enable the push notifications to know when there is an outage in your area. Choose “Account” after accessing the mobile app, and tap on “Set Notifications”. Select “Manage Push Notifications” and toggle on “Outages” from the list.
Reset the Wireless Router
Did you change the Spectrum router’s network settings? It could be a reason why the blue light is blinking continuously. Revert the router’s default configuration in such instances to fix the error. You can do that without any technical support by using a button. Additionally, you can restore the router’s previous settings from the setup page.
How to Reset the Spectrum router with a Button?
Spectrum included a reset button in the latest Wi-Fi router. Usually, it is located on the device’s back panel. Press that button with a small object for at least 10-15 seconds. Release the button when the power turns green from blue. Restart the Spectrum router and enjoy uninterrupted internet services.
How to Reset the Spectrum Router from the Configuration Page?
Open a web browser, go to the address bar and write “Spectrum.net”. Press the Enter key and when prompted, provide the default logging details. Head towards the “Internet” tab and locate the Services and Equipment section.
Click on “Experiencing Issues” and wait until the next window appears. Tap on “Reset Equipment” and restart the Spectrum router after a few seconds. Reconfigure the device’s wireless settings, and the blue light won’t further blink.
Lastly, Use the Windows Network Troubleshooter…
Windows’s network troubleshooting tools can fix the complicated router issues. Use that to eliminate the Spectrum router blinking blue error. Hold the Windows and R keys together and write “control” when the Run box pops up.
Press the Enter button to access the Control Panel tool. Head towards “Network and Sharing Center” and tap on “troubleshoot problems”. Select “Internet Connections” and mention the network problem you are experiencing.
Windows will provide you with a list of solutions to resolve the problem. And, if that doesn’t work, update the Spectrum router’s firmware. Install the latest Wi-Fi drivers to get rid of this Spectrum router error. Contact a router expert if the blue light blinks due to faulty hardware.
