Whether you want to reduce bandwidth usage or deny online access, there are many reasons to block devices on the router. Sagemcom included this function in its latest wireless routers. Enable the MAC filtering feature to limit user access.
Besides, the Sagemcom router also comes with a Parental Control feature. It prevents kids from accessing the sites from any devices connected to the home network. Increase the network security by using these Sagemcom router features. Users can enable these features from the setup page for the Sagemcom router block device
But, you need to know certain router-related details before that. Check the Sagemcom router’s IP address and login credentials. Additionally, it’s important to find the router model number. Place the wireless router close to the Wi-Fi enabled devices. Otherwise, you might get connectivity issues when enabling MAC filtering or Parental Control.
Requirements for Sagemcom Router Block Device
Before blocking the devices, ensure the router is providing a stable Wi-Fi connection. Restart the router if the Sagemcom router’s internet light is blinking. Connect the router and the PC properly via an Ethernet cable — plug in the wireless router and PC’s power cable into the electrical outlet. And, update the router firmware and the web browser.
Easy Methods for Sagemcom Router Block Device
There are several ways to block a device on the home network. You can use the Sagemcom router’s built-in firewall to do that. It blocks the access of unwanted devices and secures the router from hackers.
Additionally, you can disable the dual-band Wi-Fi to restrict the users from using Wi-Fi. Or, you can use Mac filtering and Parental Control to block the devices.
How to Block Devices on Sagemcom Router using Mac Filtering?
Different devices have different Mac addresses. Once you identify that, blocking the devices will be easy in Sagemcom routers. Additionally, Mac filtering also blocks the incoming traffic from the added Mac addresses.
Need to know how to enable this feature? Follow these steps to permit access using the Sagemcom router’s Mac filtering:
Enter the default IP address
Open a web browser, go to the address bar and write the private gateway IP. Press the “Enter” key to open the Sagemcom router’s login page.
Did you get any error messages after entering the IP address? It indicates you have provided the wrong gateway IP.
Check the label presented on the router’s back to find out the IP address. Sagemcom assigned 192.168.1.1 in most of the routers. But, this might vary from one home Wi-Fi router to another. This is why you should check the device’s gateway IP beforehand.
How to Check the Sagemcom Router’s Gateway IP?
There are other ways to locate the wireless router’s internal IP address. Did you connect the router to a Windows 10/11 device? Tap on the Wi-Fi name, and click the “i” icon to open the network’s properties window. Head towards the “IPv4 DNS server” section to find out the router’s gateway IP.
Mac users need to first open the Apple menu. Move to the “System Preferences” section, and choose “View” when the network name appears. Select the right Wi-Fi name, and tap on “TCP/IP” to know the Sagemcom router’s IP address.
Log in to the Wireless Router
Did you successfully get into the login page? Enter the default username and password there and click “Sign In”. A setup page will open if you have entitled the right login credentials. But, if the login page fails to load, check the username and password once.
Sagemcom uses “admin” as the router’s username and password. But, if that doesn’t open the setup wizard, write “password” in the “password” box. And, reset the Sagemcom router if you forget the default password or username.
Identify the Devices that need to be Blocked
Once you access the router’s admin panel, check which devices are connected to the router. Go to the “Advanced Settings”, and “Device Info”. Sagemcom will display a device list that is using the internet. Note down their MAC address and assigned IP addresses.
Find the Mac Filtering Option
Have you set up the Sagemcom router before? Then, you might not know where to find the MACl filtering option. Head towards the “Wireless” section to choose “MAC Filter”. Choose the router’s wireless network name and go to “MAC restrict mode”. Select “Allow” and navigate to the “MAC address” section.
Click “Add” to include the device’s MAC address that you want to block. Choose “Apply/Save” to limit the listed devices’ access. Sagemcom added the connected devices’ Mac addresses in the WPS method. But, if the router fails to do that, use the above steps to add the MAC addresses.
How to Block Devices on Sagemcom Router with Parental Control?
Enabling this Sagemcom router privacy feature is pretty easy. Open a web browser, go to the URL bar and write the device’s local gateway IP. Press “Enter” to access the Sagemcom router’s login page. Enter the default login information, and hit the Enter button.
Head to the “Advanced Setup” section when the setup page appears. Tap on “Access Control” and move towards the “Parental Control” section. Go for the “Internet access control planning” option, and after that, choose “All devices”.
Alternatively, you can choose “Selected device” to block internet access to limited devices. Go to the “Gateway Time” section to set the block time. Moreover, you can choose a specific date to block the devices. Select “Apply”, close the setup page and restart the Sagemcom router.
Other Ways to Block a device on a Sagemcom Router
The Mac filtering or parental control might not work when the internet is down. Thus, you need to think about other options for the Sagemcom router block device. Change the Wi-Fi password to prevent unauthorised users from using the Wi-Fi.
Besides, you can set up a guest network to permit internet access. Change the encryption mode to “WPA2-Personal” from “WEP” to secure routers from hackers. Re-configure the Wi-Fi security options to add an extra layer of protection. Contact a router expert for more effective security solutions.