Call Us! +1-855-589-4554
Motorola SBG6580 Password Reset

Motorola SBG6580 Password Reset: Detailed Guide

Motorola SBG6580 Password Reset

The password is a very crucial piece of information required to access your router. All routers come with a set of default credentials that you must use to access their interfaces for the first time. You must customise them as soon as possible to optimise the security of your router’s network. 

People might often end up forgetting their router’s password under various circumstances. In such cases, you might have to reset your router to its default settings for resetting the default password. However, you must do that only as a last resort as we shall see.

Are you unable to log into your Motorola SBG6580 router’s admin interface? 

In that case, you must try out the solutions given here first before performing a reset. Also, follow the steps given here if you need any help with setting a new router password. 

When Should You Reset Your Motorola SBG6580 Password?

You have to reset your Motorola router’s password only when you cannot access it by any means. So, you might not necessarily need to reset the password in all cases of login failures. 

You must check whether any other issues are causing the admin login issues on your router. Resetting the router and hence the password might be the only option left if you cannot find any explanations for the issue. 

Do you want an immediate solution to your router login problems? 

In that case, you can consider resetting the router right away to restore its factory settings. You would then have to go through the setup procedure for your Motorola router once again. In some cases, you might also need to reset your router despite knowing its password.

5 Fixes to Try Out For Login Issues Before Resetting Your Router

You must re-enter the password first and make sure to type it in correctly. If that does not work, you must consider the various possible causes of the router admin login error. 

Depending on the cause, you must get a solution with one of the following fixes:

  1. Restart the Router and all the Connected Devices

The login issues you are facing might indicate a temporary error in your router. In that case, you must try restarting your router and the computer for a solution. Simply turn them off for at least 30 seconds before turning them back on. Then, check whether the login issues persist and try the next solution if required. 

  1. Fix the Connection Issues

As you probably know, you must use an ethernet connection with your router to access its interface. The connection might have faced an issue if you keep failing to log into your router. In such cases, you must try reconnecting the cable at both ends of the connection to fix the issue. 

The cable might be damaged if the login keeps failing repeatedly. So, you might also want to try using a different ethernet cable for a solution. This can fix the issue effectively in many cases after all. 

  1. Clear Your Browser’s Cache

You might fail to access your router due to a corrupt browser cache in some cases. Deleting the browser cache can offer you an immediate solution in such situations. So, open your browser and visit its Settings menu to find and delete the cache files. You can also simply consider using a different browser for a solution. 

  1. Use a Different Device for Admin Login

The Motorola router login issues might also have something to do with the device you are using. So, you might have to use a different device if the previous solutions have failed. If you succeed in accessing your router, that means there is an issue with the device you were using previously.

  1. Disable Your Antivirus Program

The antivirus on your device might be causing the router admin login issues. So, you must consider disabling the antivirus while trying to access your Motorola router. Launch the app and turn it off before attempting the login again. You might succeed in accessing your router’s admin interface this time. If you cannot, then resetting the router might be the only option left unless there are any other solutions left untried. 

How to Factory Reset Your Motorola SBG6580 Router?

Resetting your Arris/Motorola SBG6580 router is quite easy regardless of the method you use. You can use the Reset button on the device’s panel for that or do it through the admin interface. The latter method is suitable only when you have not lost the existing password as you probably know. 

Proceed with the following steps depending on the method you want to use for the reset:

  1. Using the Reset Button

The Reset button on the aforementioned Arris/ Motorola router model is located inside a small hole on the back panel. So, you must use a paper clip or any other object that can reach the button to press it. Press and hold down the Reset button for at least 10 seconds whenever you are ready. 

Keep an eye on the LED lights at the front while pressing the button. Release the button whenever you see the lights flashing to accomplish the reset. You should be able to log into the admin interface with the default credentials once you are done. 

  1. Using the Web Interface

As mentioned earlier, you can also use the web interface to perform the reset. However, you might find using the Reset button a simpler method for resetting your router. You can use the admin interface if there is an issue with the button or you cannot use it. 

Log into your router’s interface with the existing credentials and navigate to the Status section. Then, click on Security and choose ‘Yes’ under “Restore factory defaults”. Click on Apply to proceed with the reset and click on ‘OK’ to confirm. Reboot the router after the reset and proceed with setting it up. 

Configure Your Router And Set a New Admin Password

As you know by now, the factory reset will restore the default admin credentials on your router. Keep your computer connected to the router to proceed with re-configuring the latter. 

Open any web browser on your device and access your router to set it up in the following steps:

  1. Open the Login Page and Access the Interface

Enter your router’s default gateway in the search bar to reach the admin login page. Check your router’s label or manual, if required to confirm the default IP address. The Motorola SBG6580 usually comes with the default gateway “192.168.0.1”. 

Then, enter the default credentials in the login page to access the router interface. You can find the default credentials on the router’s label or on the internet in case you have forgotten them. The Motorola SBG6580 router has “admin” and “password” as the default username and password respectively. 

  1. Configure the Important Settings

You can complete the basic setup of your router by changing the admin login credentials from the Security tab. So, you can set a new password in a few easy steps on your Motorola router. 

Make sure to note down or save the password somewhere, so that you do not lose it again. After all, you would have to reset your router and configure it again if you forget it. 

You also need to configure various other crucial settings apart from the admin credentials. Here are some of them that you might want to customise right now:

Network SSID and Name

The network name and password are quite important aspects of your router. You must use an SSID that can help you identify the network easily. Also, you should create a password that is strong enough to optimise your Wi-Fi network’s security. 

Security Mode

You have various security options to choose from on your Motorola router. Click the one that you want to use and select the Enabled option under it. You should find the WPA-PSK, WPA-2, WPA2-PSK, and WEP Encryption options on the Motorola SBG6850. 

Network Options

You can enable or disable the primary network depending on your requirements. The same goes for the closed network option on your Motorola router’s interface. These settings are quite important and you must make sure to configure them as soon as possible after the basic setup. Also, remember to apply any changes you have made before logging out of your router’s interface. 

Bandwidth and Wireless Channel

The Motorola SBG6580 offers you two bandwidths – 2.4GHz and 5GHz. You might usually prefer to enable both of these bands on your router. Apart from that, you must also select the right wireless channel for your Wi-Fi network. Make sure to use a channel that is less commonly used by other wireless networks near you. Now, that will help you minimise or even avoid wireless interferences to your network after all. 

What if You Cannot Reset the Password?

As we have seen, you can reset your Motorola router password by performing a factory reset. Also, this step is the last resort to fix various router issues. In case it fails, you might want to call an expert for help or replace the router, if required.