Linksys RE3000W Setup — An Easy Guide 2022
Linksys has designed the best Wi-Fi range extenders – and RE3000W is not an exception among them. It comes with exceptional features and is compatible with every wireless router. Linksys RE3000W has QOS traffic management technology which reduces the buffering. Additionally, this Linksys product contains one internet port, and it helps the users to connect additional wired devices with the routers.
Millions of people are using Linksys RE3000W, and there are hefty reasons behind that. It can increase the internet speed up to N300 Mbps and provide a reliable connection. This Wi-Fi range extender has benefitted remote workers the most. By using Linksys RE300W, you can perform internet-related tasks without any hassle. But, for that, it is important to set up this Linksys Wi-Fi extender first.
Here is how you can opt for the Linksys RE3000W setup without facing any issues:
Basic Requirements for the Linksys RE3000W Setup
Before setting up Linksys RE3000W, note down the router’s login credentials. You should also know the right wireless network name. Check if the power cables of the wireless router are connected to the right port.
Consider replacing the damaged router ports, if required. Never try to repair the damaged router ports with D-I-Y hacks. Instead, contact the experts to fix that and start the Linksys RE3000W setup process.
But, don’t initiate the Linksys RE3000W setup process if the Wi-Fi connection is unstable. It might prevent the wireless range extender from connecting to the router. Disconnect all the devices that are connected with Wi-Fi to avoid this sort of problem. And, make sure this Linksys Wi-Fi range extender isn’t placed far from the router. Or else, you won’t be able to enhance the router’s coverage to smartphones, computers or tablets.
Easy Steps to Setup Linksys RE3600W v2 n300
After checking the above-mentioned details, connect Linksys RE3600W to the power source. Wait for a while and check if the power light of the extender turns green. Now, turn on the router by holding its power button.
Once the green light of the router starts to blink, open the laptop. After that, look for the Wi-Fi network name “Linksys Extender Setup”. Tap on it and check if the Wi-Fi extender name is showing on the device.
Unable to find the Linksys Extender Setup option in the available Wi-Fi list? Turn on and off the Linksys RE3000W to solve this connection problem. Additionally, you can reset the W-Fi range extender to eliminate this critical problem. After this, access any web browser from the Wi-Fi enabled devices and move to the address bar. Search for the official website of Linksys or write the router’s default IP address.
Don’t know the default gateway of the wireless router? You will find that at the back of the router – it will be either 192.168.1.1 or 192.168.1.0. Enter the right IP address and hit the “Enter” button to get the login page. When the Linksys range extender page appears, choose the preferred language. Then, navigate to “Start’ and tap on “I Agree” after going through the license agreement. Now, choose the right router name from the list of the Wi-Fi networks from the next page.
What Else Needs to be Done?
After connecting the Linksys range extender with the router, wait for a few minutes. If it notifies that Linksys RE3600W is close to the router, don’t change its location. You can also click on “Connect Anyway” to continue the Linksys RE3600W setup process. But, if you don’t know which will be the right spot to keep the router, select “Find a better location”.
A new window will appear on the screen, write the Wi-Fi password and choose “Next” after that. If you have configured Linksys RE3600W successfully, a confirmation message will appear. But, if you didn’t get that, make sure to check the wireless network name and password. You might have chosen the wrong Wi-Fi name or provided an incorrect password. Choose the right one to complete the Linksys RE3600W setup process.
How to Setup Linksys RE36000W using WPS Button?
Linksys has included a built-in WPS button in the Wi-Fi range extenders. Use that to set up the Linksys RE3600W v2 N300 within a minute. But, do you know how to set up this device in the WPS method? Start with connecting the power units of this Linksys Wi-Fi range extender. After this, turn on Linksys RE3600W by holding its power button for a few seconds.
Now, locate the WPS button and press it once you find it. Then, press the WPS button of the wireless router for at least 5-6 seconds. Wait until both the router and Wi-Fi range extender’s WPS LED light turns green.
The green light indicates Linksys RE36000W has established a connection with the router. Place it anywhere in the house and play games without internet dropping issues.
Steps for Linksys RE3600W Setup via Mobile Application
You can set up this Linksys Wi-Fi range extender from the Linksys app. This mobile application works on both Android and iOS devices. The Android users should download the “Linksys” app from the Playstore. And, if you are an iPhone user, you will get it in the App Store. After installing this app, open it and tap on “Log in” if you have already previously used a Linksys product.
But, if you don’t have any Linksys products, click on “New Here” and create login credentials. Enter the new login password and username and choose “Wi-Fi range extender” from the list. After that, select the Linksys Wi-Fi range extender’s model and tap on “Settings”. Now, choose the “Edit” option and enter the right password and username of the range extender. Choose the “Share Port Mobile Login” option and connect the device with a wireless network.
Once done, you can control Linksys RE3000W v2 N300 from the smartphones. But, if you are unable to set up this Wi-Fi range extender, update the web browser. Additionally, you should consider upgrading the firmware of Linksys RE3600W. Make sure you are not using a malfunctioned Linksys Wi-Fi range extender. But, if these didn’t solve the setup difficulties, make sure to contact an expert.