Call Us! +1-855-589-4554
how to configure tp link wireless router with cable internet

How to Configure Your TP-Link Router Using a Cable Internet Connection?

how to configure tp link wireless router with cable internet

Even though the latest routers come with wireless functions, you can also use a wired connection with them. Moreover, a cable connection can usually offer you a more reliable one than a wireless one. So, you might need to use it for various purposes, including accessing your router’s interface. Apart from that, you can switch to a cabled connection anytime to fix network problems.

Are you looking for a way to configure your TP-Link router using an ethernet connection? Then, you can accomplish this task quite easily with the steps we have given below. So, keep reading to know how to proceed with this task and get other useful information.

Steps to Configure Your TP-Link Router with a Cabled Connection

You can configure your TP-Link router easily within a few minutes, regardless of the method. And, here is to proceed, if you want to configure the router using a cabled connection:

Prepare the Router 

You need to power on your router to configure it. So, connect it to a power source and switch it on. You can tell when it is ready for use by observing the LED light. Also, make sure to connect the power cable properly at both ends. You will face problems while using the device if there is a power connection issue.

Your TP-Link has an Internet port at its rear. You must connect an ethernet cable to this port once the router is ready. Connect the other end of this cable to a modem and proceed with the next step.

Check the Default Credentials of Your Router

You have to use the default credentials to access your router’s web interface for the first time. These details are usually printed on a label at the bottom of the device. You should check the service manual for the default username and password if it is not there. Once you find the default admin credentials, you are ready to access your TP-Link router’s interface.

Open the Admin Interface on Your Browser

You can access the login page for your TP-Link router using its default IP address. Are you unaware of the default gateway for your router? Then, you can find it on the label or service manual of the device. Apart from that, you can simply enter “tplinkwifi.net” in the search box instead of the default IP. This should open the login page for your TP-Link router, regardless of the model.

Enter the credentials in the username and password fields to open the interface. Once you access the interface, you can configure various aspects of your TP-Link router. Depending on the model you are using, you can have considerable flexibility while doing that.

Configure the WAN Connection

You must configure your TP-LInk router’s WAN connection to establish its connection with the modem. You must go to the Network section and click on WAN to do that. Then, check the WAN Connection type and select the Dynamic IP option. This is the most suitable option for home Wi-Fi networks and enables automatic network configuration.

Click on Save once you are done, and then exit the WAN settings page. Then, open the page again after a few minutes and check for the WAN IP address. If you find one assigned there, clone it using the Clone MAC Address option. Then, click on save to complete the configuration of your TP-Link router.

What if you do not find an IP address assigned to the WAN connection? In that case, restarting the router might do the trick. So, check whether you get internet access after doing that. If you cannot access the web, you might have to follow the aforementioned procedure again.

Important Configuration Options on Your TP-Link Router

You can configure many other aspects of your router other than the WAN address. Here are the configuration options you have on your TP-Link router’s interface:

Status Configuration

This page does not let you configure any functions on your router. But, it shows you all the configurations you have made on the device. So, it is an important section of the interface that you must check after logging in. After all, it would help you know what changes you need to make to your TP-Link router’s configuration.

Quick Setup Wizard

The Quick Setup Wizard lets you set up your Wi-Fi connection as per your requirements within a few minutes. You can use it to set a name and password for your Wi-Fi network. Apart from that, you can also select a security mode for your network with this tool. You have to use the Quick Setup Wizard to set up the network whenever you reset your router.

Wireless Configuration

You might need to make various changes to your router’s wireless network. In such cases, you have to visit the Wireless Configuration page on the interface. You can find quite a wide range of configuration options in this section. And, that includes – Mac Filtering, Advanced Settings, Wireless Statistics and High Speed.

Network Configuration

You can opt for a static or dynamic IP for your LAN network. Moreover, you can modify the IP if you use a static one. You can make these configurations through the LAN section on the interface. Apart from that, you can also customise the DHCP Settings on your router.

System Tools

All routers come with essential tools on their interface for controlling the device. You can find options to diagnose various issues with your router and customise the time settings. Apart from that, you can also find options to backup data or restore the default settings. Moreover, the latest TP-Link routers also offer you the option to update the firmware through their interface.

Get the Latest Firmware for Your TP-Link Router

Do you want to enjoy the latest features on your TP-Link router? Then, you must keep its firmware up-to-date. As mentioned above, you can nowadays look for an update through the router’s interface. So, get the latest one you find and install it on your router to maintain its performance.