Call Us! +1-855-589-4554
Arris Router Blinking Green

Fixes of Arris Router Blinking Green

Arris Router Blinking Green

Arris router blinking light is a common error that you can observe in almost every router. Over here, we will be particularly talking about the Arris router blinking green. You can see the blinking phenomenon during the startup or when operating the router.

This blinking light has particular indications that help us to know if there is an error in the router or not. Thus, you can easily operate the issue and solve it. Particularly, if there is any blinking in the light, then it means that something is wrong with the IP registration.

Even green lights are of two main types, one is solid green, and another one is blinking or flashing green. Solid green means transfer of data at the rate of 1 gigabit per second, and blinking green means data traffic is in progress.

Even with other brands, you might get the same indications. It doesn’t matter if it is connected through USB or the ethernet; improper device connection can be the reason behind blinking green light.

Methods to Fix Arris Router Blinking Green

We have to discuss the reason behind the blinking green light in the Arris router, first. And, it is not quite difficult, but it is quite common. You can easily fix the Arris router blinking green with some tips given below.

The tips are properly explained so that you don’t have to struggle too much with the fixes.

Check the Cables

First, go with the simple one; it might be possible that your cables are loose or damaged. In most cases, the USB cables, the ethernet cables and the coaxial cables turn out to be faulty. If they are not fully plugged in or damaged, the router or the modem might not work properly.

So, if you see any blinking, make sure every cable is plugged in properly and in the right position. Remember to check both ends of the cord.

Reset the Router or the Modem

Resetting can be adequate to deal with this kind of problem. Even after resetting, you can still see the blinking green light, which means that your router is at fault.  It has been seen that this method fixes many problems. The steps are given below:

  • First, you need to unplug the cord from the wall outlet.
  • Make sure that all the lights are off, and then plug in the cords after some time.
  • After plugging in the cord, wait for the internet to turn blue. This blue light indicates that your internet connection is active.

Check the Power Supply

You must check whether you have enough power supply to run your device or not. It might be possible that your router needs a proper power adapter with the correct voltage and current specification.

If you want, you can also go through the Arris router manual or even contact the manufacturer to make sure that you have the right cables.

Check the Connection

Make sure that your power cable is properly connected and into the right cord. You might face the blinking green due to loose cables restricting the power supply.

Thus, it’s better to check if everything is properly plugged in or not, and there is no interference. Also, make sure the cables are tight and in the right socket.

Use Web Interface

This method is factory reset with the help of a web interface. The steps are given below to help you out:

  • First, you have to launch the web browser.
  • In the address box, enter and hit the Enter button.
  • Then, use the username and the password to login into the account.
  • Now, you will see the Utilities tab. Select the tab and go to the factory default on the left panel.
  • Hit the button, confirm your choice, and click OK to implement the changes. See if it stops the Arris router blinking green or not.


These are the steps that will help you deal with the Arris router blinking green. The steps have helped many users and have fixed the problem. It is quite a common issue, so you don’t have to worry.