What is Arris Modem IP? How to Log in and Configure
The wireless routers and modems from Arris have impeccable features to access the internet, seamlessly. With the help of less network congestion, you can easily afford an Arris modem or a router which will be the best for creating a home network. But, having the router is not enough. You need to know the proper use of Arris Modem IP.
The modem and a router IP are not similar to each other. The router IP is private and no one can access it except you. Whereas the modem IP remains public and helps you in converting the signals. After that, it delivers it to the router and then the router re-distributes the data packets to its connected device.
What is Arris Modem IP?
To understand the concept of the modem IP, you must understand the importance of IP first. The IP is a type of address that uniquely identifies any computer or a network device. It contains a set of binary numbers with four segments. Each segment is separated by dots and their value ranges from 0 to 255, not more than that. In addition to that, the IP address is destined to target only one computer or a network device.
Logging in Via Arris Modem IP
Setting up the modem is necessary as your home network is being concerned. One of the most straightforward ways is to place the modem IP in your computer’s default browser. When you access the modem’s user interface, observe every feature carefully. In case you need the username and password, you can either look at the user manual or ask the ISP.
Preparing the Arris Router for Internet Access
It’s obvious that you are using the modem and the router which is manufactured by Arris. After taking care of the modem, you need to log in with the router’s username and password. Here, the router’s default IP address will come in handy. After that, visit the device’s dashboard. Apply all the necessary network data in the Network Settings and save the changes.
How to Configure the Wireless Settings?
The wireless settings in the Arris router are very much clear to understand. The wireless settings page will only come in handy when you use the Arris Modem IP. There are three sections. The first section is “Basic Setup”, the second is “Security Settings” and the final one is “WPS Settings”. So, let’s get to the details.
Basic Setup
The basic setup section consists of the hostname. After that, there is a check box for enabling and disabling the wireless feature. Now, SSID is the name of the router. By default, the router manufacturer name and model number are set. If you want the name to be visible, then tick mark on the option of “Broadcast Network Name (SSID)”. If not, then leave the checkbox blank. After that, depending on necessary circumstances, you have to make changes to the remaining options – They are “Username”, “Tx power level”, “Channel”, “Language”, and “Security mode”.
Arris Router WPA/WPA2 PSK (Security Settings)
Always try to set the encrypted algorithm to AES. In addition to that, make sure that the pre-shared key must be a mixture of uppercase letters and numbers.
The WPS Settings
The WPS Settings consists of a bunch of options. Thus, you will get the privilege of enabling and disabling the WPS. Regarding the device Pincode, you cannot change it. Always set the encryption mode to PBC and leave the Enroll PIN CODE field blank. Last but not least, the Apply button is for saving all the necessary changes.
The Expert’s Recommendation regarding the Wireless Settings
After you log in and configure the Arris Modem IP, follow expert’s recommendations. In doing so, you will come to know what’s the best settings to access the internet via Arris modem and router, seamlessly.
- Check the “enable and disable” feature of the Arris wireless router.
- Make sure you assign a name through which you can identify the device easily.
- The broadcast name of the network must be tick marked.
- Set the Tx power level to high mode.
- The channels must be set to auto.
- Choose the convenient language of your country (English preferable).
- Set the security mode to WPA/WPA2-PSK.
- The encryption method/algorithm must be set to TKIPAES.
- Enable the WPS and make sure that it is checked.
- The encryption mode must be in PBC mode.
These are the most important settings. Carefully, observe all the recommendations and implement them.