Call Us! +1-855-589-4554

Can I Use My Own Modem With AT&T Fiber?

Can I Use My Own Modem With AT&T Fiber

The wireless modem users can avail the AT&T internet services by paying a monthly fee. Get smart Wi-Fi and up to 5 gigabytes of internet speed using this fiber. Perform the online activities without lagging issues using this internet plan.

AT&T fiber allows you to transfer 1TB of data to four devices simultaneously at 1000Mbps speed. Besides, you can experience a maximum of 4.7 Gbps upload and download speed with this multi-gig fiber. Improve the network security by using this AT&T service in the modem.

Replace the DSL and cable internet and get a fiber connection. Increase the browsing and 4K media streaming experience with this AT&T technology.

Still thinking, can I use my own modem with AT&T fiber? This broadband connection might not work on all the modems.

You can use this fiber only in the latest DSL, ADSL and smart Wi-Fi routers. Ensure the modem is compatible before getting the AT&T internet service plan. Check if it’s working properly and place it close to the router to avoid connectivity issues.

Requirements to Connect the Modem with AT&T Fiber

Certain factors need to be considered to use the internet service in the modem. Users will need a multi-socket power adapter that is compatible with the device. If you have a voice service on the DSL line, it’s important to use filters. And, you should have an ethernet and data cable.

Do you have a modem that was released before 2015? It won’t support the AT&T fiber technology. Replace the existing one with a new router model to get these benefits. Additionally, you will need a laptop or PC with an ethernet port. Otherwise, connecting the modem to AT&T fiber might be challenging.

Steps for Can I Use My Own Modem with AT&T Fiber

Setting up the AT&T fiber connection on the modem isn’t difficult. The users need the above-mentioned things for a hassle-free broadband installation. Many take the internet service provider’s help to do that. However, you can connect the modem to AT&T DSL internet by following these steps:

Install DSL Filters on the Devices connected to the Telephone Line

Don’t install the filter on the phone jack, and because you will need to connect the modem’s DSL cable there. Instead, use a dual-port filter to connect the phone and the modem. And, proceed to the next step if you don’t have a phone with a DSL connection.

Turn off the PC or Laptop and connect it to the Modem

Now, it’s time to power off the connected Wi-Fi enabled devices, like PCs or laptops. Additionally, you need to turn off the modem by unplugging its power cables. Insert the data cable directly to the wall outlet if you don’t have an AT&T phone line. Connect one end of the ethernet cable to the PC or laptop port. And, plugin the other end to the modem’s port.

Turn on the PC and Modem

Press the laptop or computer’s power button to restart the device. Tap on the Wi-Fi menu and select the correct wireless network name. Reconnect the modem’s power cords to the electrical outlet when the PC connects to the internet. Wait until its power and ethernet LED turns solid green. It indicates that the DSL modem provides a reliable internet connection.

Reset the Modem

Is the DSL modem’s power light blinking red? Restart the networking device to fix this problem. And, when all the status lights stop flashing, find its reset button. Usually, this button is located at the wireless modem’s back. But, this might vary from one DSL or ADSL modem to another.

Press the reset button with a paperclip for 10-12 seconds. Release the button when the power LED starts flashing green. This indicates the modem has restored its default configuration. Depending on your modem, a setup wizard might appear on the PC screen.

Follow the on-screen instructions to complete the modem installation. Moreover, you might need to enter a product access code when prompted. Users can find this security password on the product label. Once you get that, write on the setup page and provide the login credentials afterwards.

Sign in to the AT&T Fiber Account

Did you get the AT&T fiber page? Head to username and write “attreg@att.net”. Go to the password field, enter “attregas” and press the Enter key. It will open the AT&T account from where you can change the network settings.

However, this page might not appear for entering incorrect login details. If you are unaware of the username and password, open a web browser. Move to the URL bar, write “att.net/activate” and hit the Enter button.

When the web page opens, tap on “Get Started’, select the preferred language and click “Continue”. AT&T will check the system configuration and open the “Activate” section afterwards. Enter the DSL telephone number, and click “Submit” to complete the account activation process.

Reconfigure the Modem Settings

Open a web browser, head to the address bar and write the modem’s default IP address. Press the Enter key to access the login page and enter the username and password. Opt for “Log In” to open the DSL modem’s configuration page.

Reset the wireless and network settings and choose “Apply” afterwards. Additionally, you can change the modem settings using the AT&T member ID. Or, enter the DSL network password to enable its wireless functions. After a few minutes, reboot the DSL modem and wireless router. When these devices turn on, you can use the AT&T fiber connection.

Which AT&T Fiber Plan Should the Modem Users use?

AT&T offers the best internet plans at an affordable price. Go with their fiber internet 300 plan and send/receive emails at 300 Mbps.

Do you use Wi-Fi for video and music streaming? Choose the AT&T fiber internet 500 plan and get up to 500 Mbps Wi-Fi speed. The internet 1000 plan will be ideal for file sharing and online gaming.