Call Us! +1-855-589-4554

Netgear wn3000rp Setup: Avail Detailed Guide

There are always some specific spaces in the house or office where you can’t connect to the Internet properly. For instance the basement, garage or some other places. This situation arises mostly when your router has a limited range. 

To help you enjoy connectivity at an extended range there are devices called routers. These devices allow your router to increase its range of service. Therefore, you can enjoy connectivity at places where your WiFi strength is low. 

Netgear is a popular brand known for manufacturing high-quality routers and extenders. One such Netgear extender is the wn3000rp. Here, we’ll walk you through a detailed Netgear wn3000rp setup guide.  

Steps for Netgear WiFi Extender wn3000rp Setup:

Configuring or setting up a router or extender is always a crucial task to perform. The appropriate configuration will ensure that you get an uninterrupted services. There are two ways by which you can perform the Netgear WiFi extender wn3000rp setup. These are as follows: 

  1. Set up through the WPS button- This is comparatively a simple and easy procedure. You’d hardly require 2-3 minutes to execute the entire setup mechanism.
  2. Using the web browser- This process is a bit longer as compared to the previous one. It might cost you more than 10 minutes to wrap up the entire process. 

Here, we’ll talk about both the setup processes in detail. You can follow whichever you think is suitable for you. 

Setup with the WPS Button

Every router and extender comes with a WPS button. This button is usually designated by a lock or an arrow symbol. To carry out Netgear wn3000rp setup with the WPS button you need to identify this button first. Then take the help of the user manual guide to locate and identify the WPS button.

Once you’ve found the button follow these steps and proceed with the setup:

 Step 1

At first, connect the extender to a power socket. Now, place the extender at a place close to the router. Alternately, you can also place it at an equal distance between the router and the device out of WiFi range.  

Step 2

Now, press the WPS button on your Netgear wn3000rp extender. After exactly two minutes, press the WPS button on the router or the gateway. The wireless device will now get connected. Make sure to check if the new network is visible on your computer screen. 

The newly connected extender’s wireless name will be the same as your router’s name with a ‘.EXT’ at the end. 

If the Link LED is white that means the connection between the router and extender is strong. 

Step 3

Finally, move the extender device to a new location inside the house or the office. Place the computer device or the smartphone in an area with poor WiFi coverage. Check if the WiFi strength has improved. 

Setup Through the Web

This is an alternate method for the Netgear wn3000rp setup. Now, before you proceed with this setup method you must know the password of your router device. You’ll then need this password to connect the extender with the router. Hence, go through the following steps to perform web setup of Netgear wn3000rp:

Step 1

First, connect the Netgear extender to a power supply. Now, wait for some time and turn in on. When the extender device turns on connecting with the extender. Once the computer connects with the extender the PC to Extender indicator turns green.

Step 2

After this, launch your web browser and go to this particular address:  www.mywifiext.net. Here, you will find the Netgear setup wizard. Next, you will see a web-based guide. This guide will help you to choose a particular network for your extender. 

Step 3

In the Netgear Extender Setup option, you’ll find a page where you need to put some details. Fill this page up and then click on ‘Next’ button. From the ‘Access Point/ Extender’ option click to choose the ‘Extender’ option. Now, click on the ‘Continue’ option.

Step 4

In this step, choose the WiFi network that you wish to connect with the extender. After selecting the desired WiFi tap on the ‘Next’ option. Provide a new SSID name along with the password for the new extender. Then, click on ‘Next’ after this. 

Now, connect the WiFi-enabled device with your new extender WiFi. Once done, tap the ‘Continue’ button. 

Step 5

As soon as you click on ‘Continue’ you’ll get a message informing you that the setup is ready. Now click on ‘Next’. You’ll get to see a registration page. Fill up all the required fields on the registration page correctly. Then, choose the ‘Finish’ option.  

After the Netgear wn3000rp setup is complete you must check how well the extender is working. For this, unplug the router and take it to a place where WiFi is not strong enough. Plugin the extender and check the Power LED lights. If this light is green then the extender will be working well.

End Note…

In the end, extenders are as important as routers today. Most routers come with a limited range of functionality. So, it’s important to have extenders to increase the range. Setting up or configuring the extender is always an important task. So, if you’re wondering how to setup Netgear wn3000rp then, follow the steps provided above.

Frequently Asked Questions

1. How do I reset my Netgear wn3000rp?

At first, press the Reset button situated at the rear side of the extender. Hold the button until the Link Rate LED and the Device to Extender starts blinking. Now, release the button and allow the extender to reboot for some time. 

When the device reboots itself log in with the default username and password. The default username is ‘admin’ and the password is ‘password’. 

2. How do I find the password for my Netgear WiFi extender?

First, launch a web browser on your device that is connected with the extender. Now, type www.mywifiext.net in the address bar. Log in on the page that appears on the screen using your password and username. Now, click on ‘Settings’ followed by ‘Wireless’. Finally, search for the WiFi password in the ‘General’ tab.