How To Setup Netgear WN1000RP With 2 Easy Methods

By Philip L. Hall | October 2, 2021

WN1000RP is a wireless extender that can boost up the speed of the Wi-Fi network. You can connect it with the printers and scanners. You should keep the WN1000RP, wireless computer and wireless router in the same room to avoid further wireless interference.

netgear wn1000rp setup

Installing the Netgear WN1000RP is quite easy and simple. Follow this guide to get a stable connection. There are mainly two ways through which you can connect the WN100ORP with WiFi-enabled devices. Here, we are going to discuss those two methods.

2 Easy Methods for Netgear WN1000RP Setup

In this section, we are going to talk about the most appropriate ways to set up. Let’s begin the setup process by using the WPS Method. Next, we are going to talk about how to manually set up the Netgear WN1000RP.

Method 1: WPS Method

WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that establishes a connection between a router and a wireless device.

By just connecting both the devices you can get a fast and secure connection. In order to proceed with the Netgear WN1000RP setup, you need to perform the following steps:

First, you need to plug the WiFi extender into a power outlet.
Now, turn on the WN1000RP by holding the Power On/Off button.
Wait for a while, until the Status light turns into green.
Now, hold the WPS button of the WN1000RP.
Turn on the WPS button of the wireless router next.
When the Wi-Fi extender and the router will set up a connection, the Link Rate will light up.

Now, check if the “WiFi Device to Booster” light is turning turn on. If it turns on, then it is a clear indication that you have successfully set up the WNM100RP router. If you are still unable to set up the device, you can check out the next method, which is mentioned below.

Also Read: Netgear CM500 Setup

Method 2: Apply Manual Method

You can simply set up the extender by just using a Web Browser. This section consists of the procedure on how to set up the extender. In order to establish a connection, you need to execute the following steps:

First, you need to plug in the router and the power booster into the electrical outlet.
Wait for a while until the WN100RP status light is turning green.
Now, you can connect the network to the Wi-Fi booster.
Open a Web browser and then go to the official website of the Netgear WN100RP.
Follow the instructions that are showing on the screen to finish the setup process.

These were the possible ways to set up a wireless network. If you face any difficulty, state that through comment sections. For further assistance check our website for any tech-related guides.

Frequently Asked Questions:

How do I reset my Netgear WiFi Extender WN1000RP?

To retract a fine paper clip or other thin tool, press the re-tracked Factory resets on the bottom of your

unit for about six seconds. The Factory Reset button should be released. Wait for the reboot completion of the WN1000RP. On your computer, close and restart the web browser.

How do I reset my Netgear extender username and password?

Click on the LOG IN button. Choose Setup > Wireless Configuration. In Security Options check whether your password matches the value in the Password (Network Key) field.

Does Netgear WiFi extender work with any router?

NETGEAR wireless extension devices are generally “universal” extension devices. It is compatible,

whether sold separately or provided by an ISP, with the great majority of the wireless routers on the

market.

Posted in Netgear Router

About Philip L. Hall

View all posts by Philip L. Hall →