192.168.3.1 is the default IP address of the advanced routers and modems. Router manufacturers like Huawei and Amped use this default gateway in their devices. Even ZyXEL has set 192.168.3.1 as their latest router’s IP address. This IP address is also assigned for the home broadband network. With 192.168.3.1, the router or modem users can access the admin console. The Internet Assigned Numbers Authority registered this IP address only for private use.
Many small-large scale enterprises use this private IP address, and it helps them to prevent unauthorised users from accessing their office network. Usually, 192.168.3.1 is used to avoid the IPV4 exhaustion of the Wi-Fi routers. It also helps users overcome unwanted IP conflicts while using the internet.
But, once you access the 192.168.3.1 login page, you can resolve these network issues easily. Even the users can configure the device’s settings or login credentials from there.
How to Access the Router’s 192.168.3.1 Login Page?
Every router user needs to acknowledge the device’s IP address in the first place. You should never proceed to the login procedure without knowing that. Because, without that, the users won’t be able to open the 192.168.3.1 login page.
Don’t know what the wireless router’s IP address is? There are plenty of ways by which you can find the home/office router’s default gateway. Check the label present at the backside of the device to locate the IP address.
But, if you didn’t find that over there, right-click on the network name. Choose “Open Network and Sharing Center”, and when the page opens, select “Connections”. Then, tap on “Ethernet” and navigate to the “Details” tab. Locate the “IPv4 Default Gateway” section to check the router’s IP address. If 192.168.3.1 is written over there, then consider opening a web browser. Now, move to the address bar, write this local IP address and press “Enter”.
If you are directed to a new page, then you have entered the right router IP address. But, if the “web page is not available” message pops up, check the router’s default gateway first. You might have mistakenly written “192.168.1.3” instead of “192.168.3.1”. This is why you are unable to access the wireless router’s login page. But, if you get the 192.168.3.1 page, then click on “Login” immediately.
What Else Needs to be Done?
Enter the wireless router’s default login credentials on the next page. Click on “Sign in” or “Log in” to get into the device’s set-up page. Now, opt for changing the security options to protect the router from vulnerabilities. Besides, the users should change the encryption type to “WPA2”.
Do you want to change the domain server name? You can do that from the 192.168.3.1 login page. Even the router users with this IP address can adjust the WLAN settings.
Moreover, you can check the device’s MAC address from this login page. Many have changed their DHCP server and LAN settings after accessing the setup page. But, these router options might vary from one model to another. Make sure to consult with an expert before changing the router settings. Or else, you might face issues using the router due to misconfiguration.
How to Reset the Router Password from the 192.168.3.1 Page?
A wireless router that has a password like “1234abc” is more vulnerable to security threats. This is why you should change such passwords to enhance device protection. Every router user must reset their password/username after every three months. Combine the upper and lowercase letters in the router password to make it hard to detect. Additionally, you can add numbers in the wireless router’s passphrase.
But, do you know how to reset the wireless router’s password or username? Open a web browser and go to the address bar to write “192.168.3.1”. Hit the “Enter” button and when the login page opens, provide the router’s login credentials. Next, head to the “Wireless” section and click on the “Security” option. Now, tap on “Network name (SSID)” and remove the existing Wi-Fi name.
Enter the new router SSID and go to the “Pre-shared Key” option. In some routers, this option will be displayed as “Wi-Fi password” or “Passphrase”. Enter the current router password in the “Old password” section first. Move to the “New Password” section and enter a secure password there. Click on the “Confirm New Password” section and re-enter the password. Once done, select “Apply” to complete the password/username resetting process.
Is there any other way to Reset the Router Password?
The latest wireless routers come with a Reset button. Use that to reset the router to its default factory settings. But, make sure to disconnect the device’s power cables before pressing this button. And, you have to hold the Reset button for at least 10-15 seconds. Release the button when the router’s green light starts flashing. This LED light indicates that you have to reset the device successfully. But, if this router light is not blinking, contact a router expert immediately.
Troubleshoot the 192.168.3.1 Login Issues
Sometimes, the browser might take time to respond to the login request. Restart the wireless router and computer in certain instances. Make sure the device is connected to the right wireless network. Loose connections can often cause issues while logging into the router page. Thus, check the cables and connect them properly to avoid further interference.
Don’t connect more than one device to the router while accessing the 192.168.3.1 page. If you use Internet Explorer, toggle off the “Never Dial a Connection” option. Clear the browser cookies and caches to eliminate the login errors. If the ISP has turned off the connection, you can experience this issue. Contact the ISP, and then implement the aforementioned steps again. But, if these solutions didn’t work, the router might need to be repaired.