192.168.1.2 – Login Admin
Broadband routers have eliminated the struggle to get uninterrupted internet services in and around residential and commercial premises. When it comes to the internet and connected devices to the internet, every device is assigned a unique IP address. However, there are a few private IP addresses that router manufacturers use to easily detect the presence of routers in a home network, such an IP address is 192.168.1.2.
Certain routers come with the IP address 192.168.1.2. Administrators assign this IP address to individual devices across a home network. Apart from routers, this IP address can be assigned to any network-enabled device, such as smart TV, computer, printer, tablet, etc.
How to Connect to the IP Address 192.168.1.2?
If your router has an IP address 192.168.1.2, then you might have to log into the interface for setting up the router. You need the IP address and credentials to enter the administrative console of the router. When do you need the IP address of the router to make the login possible? It can be your first-time use, DNS server setup, or altering the credentials of your router.
How to enter the web portal of the router using 192.168.1.2? Make sure that your computer or any mobile device is connected to the wireless network of the router. Additionally, you need to ensure whether any of your routers has the IP address 192.168.1.2.
Use the Command Prompt and run the ipconfig command to learn what the IP address is. After confirmation, you have to perform the following steps:
- Open a web browser of your preference on your computer. Or, you can use a mobile device.
- Now, you can type the IP address that is 184.108.40.206.2 in the Address Bar of the browser. Press Enter to continue with the IP address.
- This will take you to the web interface of the router. Now, it’s time to log in and you need the essential credentials. Look for an appropriate username and password from the internet according to the model and brand of the router.
The username for 192.168.1.2 is generally root or blank. When it comes to the password of the router, it can be either 1234 or admin. You can also check the bottom of the router. Some manufacturers have mentioned the credentials over there.
Routers that Use 192.168.1.2
Mostly, Linksys, D-Link, Cisco, and Netgear routers use 192.168.1.2 as their IP addresses. You might wonder why router manufacturers assign the same IP address. Well, when it comes to using a network device within a private range, then there’s nothing wrong with using the same IP address for different private ranges.
Linksys and Netgear have chosen their IP addresses in the 192.168.1.x range. The private range IP addresses for these routers can start from 192.168.0.0. However, administrators prefer to go for a series rather than zero and some of them end by choosing the 192.168.1.1 series. It has now become a logical choice for the home network range.
Once the administrator starts assigning the IP addresses to different devices, 192.168.1.2 gets assigned to one of your home devices eventually. Thus, you end up getting the IP address 192.168.1.2 as it’s one of the initial arrangements of the series for your routers and other devices.
What are Default Login Credentials for 192.168.1.2?
Credentials are important when you wish to enter the web interface of your router. If it’s a 192.168.1.2 router, then there can be different default login credentials and their combinations. We have collected the most common login credentials for 192.168.1.2. Let’s check them out.
Keep in mind that they are username and password respectively. Check them out and try them one by one.
What if you Can’t Log in to 192.168.1.2?
Users have reported that they were unable to open the web portal of the 192.168.1.2 router even after trying every single possible combination of credentials. Additionally, you might have forgotten the credentials for your router and you need to roll it back.
When there’s no way to go back, then you have to reset the router. Resetting the router will initialise the default factory reset settings in the router. Here’s how you can perform a quick reset on your 192.168.1.2 router.
- Since you can’t access the router’s web portal you have to perform the reset process manually. So, locate the Reset button. The button is usually at the bottom or rear side of the router.
- Grab a paper clip or pin-like object to push and hold the Reset button. Before you hold the button, make sure that the router is turned on.
- Hold the Reset button for 30 seconds. If the LEDs start flashing, then it indicates that the reset process is on its way.
After a while, the LEDs will be solid again, and it indicates that your router has reset itself to factory settings.
Users have complained that they have been experiencing difficulties with logging into the web portal of the router. If it’s not the credentials, you might be entering the wrong IP address. Or, you might be entering it in the wrong way.
For example, the number 1 resembles the L in lowercase, I in uppercase, and |. If you enter the IP address wrong, then it won’t allow you to enter the web interface.
So, be careful while entering the IP address in the web browser. If you have found that the web interface of the router doesn’t open up, then double-check the IP address, and rectify the settings, if required.
How to Assign 192.168.1.2 to a Device?
Devices get IP addresses through DHCP. And, this process is dynamic in nature. IP addresses can be assigned to devices automatically and without anyone’s interference. When you are talking about 192.168.1.2 then DHCP assigns the IP address to the device. Going for static IP addresses can cause conflicts in the network connection.